Attendant Feature Package Key Assignments - Panasonic DBS-2.3-400 Programming Manual

Chapter 5. FF Key Programming (FF5)

Attendant Feature Package Key Assignments

Software Version: CPC-B Versions 2.0 to 4.0
Address: FF5 (Attendant)# (Key)# (Feature)#
Description
In DBS systems with the Attendant Feature Package (AFP), each FF key on
an Attendant console can be programmed with a feature code. During normal
phone operation (not in programming mode), pressing the FF key performs
the feature associated with the code.
For a list of feature codes, use the same table as the "Extensions" address
(page 5-5).
Note: The AFP was discontinued in CPC-B Version 5.0.
Programming
To assign an Attendant console FF key ...
Attendant Console:
149=Attendant Console 1
150=Attendant Console 2
151=Attendant Console 3
153=Attendant Console 4
To reset an Attendant Console FF key to its default value ...
Related Programming
BLF Port Assignment: FF3 (ExtPort)# 3# (ExtPort)#
ML/MCO Separation: FF3 (ExtPort)# 44# (0 or 1)#
FF Key Copy: FF9 3# (ExtPort)# (ExtPort)##
Page 5-10
FF5 (149-152)# (1-32)# CONF (Code)#
FF Key
FF5 (149-152)# (1-32)# CONF ON/OFF
Attendant Console
DBS Manual - Revised April 2000
Section 400-Programming
Clears any
existing feature
code before a
new one is
assigned
FF Key
Feature Code
(see table on
page 5-5)
DBS-2.3/9.2-400