Panasonic KX-DT521 Quick Reference Manual
Digital proprietary telephone
Hide thumbs
Also See for KX-DT521:
- Quick reference manual (25 pages) ,
- Quick reference card (2 pages) ,
- User sheet (2 pages)
Table of Contents
Advertisement
Quick Reference Guide
Digital Proprietary Telephone
KX-DT521/KX-DT543/KX-DT546
Model No.
Digital DSS Console
KX-DT590
Model No.
Thank you for purchasing a Digital Proprietary Telephone (DPT). Please read this
manual carefully before using this product and save this manual for future use. For
more details, please refer to the manuals of the PBX.
Manuals and supporting information are provided on the Panasonic Web site at:
http://www.panasonic.net/pcc/support/pbx/
Note
R In this manual, the suffix of each model number is omitted unless necessary.
R The illustrations may differ from the appearance of the actual product.
Advertisement
Table of Contents
Related Manuals for Panasonic KX-DT521
Summary of Contents for Panasonic KX-DT521
-
Page 1: Quick Reference Guide
Thank you for purchasing a Digital Proprietary Telephone (DPT). Please read this manual carefully before using this product and save this manual for future use. For more details, please refer to the manuals of the PBX. Manuals and supporting information are provided on the Panasonic Web site at: http://www.panasonic.net/pcc/support/pbx/ Note R In this manual, the suffix of each model number is omitted unless necessary. - Page 2 Important Information Important Information WARNING Disconnect the telephone line cord from this product if this product emits smoke, an abnormal smell, or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.
-
Page 3: For Users In Australia And The United Kingdom
For information of Compliance with EU relevant Regulatory Directives, Contact to Authorized Representative: Panasonic Testing Center Panasonic Marketing Europe GmbH Winsbergring 15, 22525 Hamburg, Germany For Users in Australia and the United Kingdom R This unit is capable of being used in conjunction with hearing aids fitted with inductive coil pick-ups. - Page 4 Important Information R This device is equipped with pulse dialing while the telecom standard is DTMF tone dialing. There is no guarantee that the Telecom Lines will always continue to support pulse dialing. PTC General Warning R The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network.
-
Page 5: Accessory Information
Accessory Information Accessory Information Included Accessories KX-DT521/KX-DT543/KX-DT546 Handset (1) Handset Cord (1) Telephone Line Cord Stand (1) KX-DT521 KX-DT543 KX-DT546 KX-DT590 Stand (1) Telephone Line Cord Wall mounting adaptor (1) Screws for attaching to the unit (2) Screws for wall mounting (3) Two cords for the KX-DT521NE/KX-DT543NE/KX-DT546NE. -
Page 6: Optional Accessories
Accessory Information Optional Accessories KX-DT521 KX-DT543 KX-DT546 Wall mount kit KX-A432X KX-A433X Digital DSS Console KX-DT590... - Page 7 Location of Controls Location of Controls KX-DT521AL/KX-DT521NZ/KX-DT521SX/KX-DT521UK/KX-DT521X KX-DT521NE...
-
Page 8: Location Of Controls
Location of Controls KX-DT543AL/KX-DT543NZ/KX-DT543SX/KX-DT543UK/KX-DT543X KX-DT546AL/KX-DT546NZ/KX-DT546SX/KX-DT546UK/KX-DT546X KX-DT543NE/KX-DT546NE... - Page 9 KX-DT590UK KX-DT590X A LCD (Liquid Crystal Display): KX-DT521: 1 line, KX-DT543: 3 lines, KX-DT546: 6 lines B Message/Ringer Lamp: When you receive an intercom call, the lamp flashes green, and on an outside call, the lamp flashes red. When someone has left you a message, the lamp stays on red.
- Page 10 Location of Controls (AUTO ANS/MUTE): Used to receive an incoming call in hands-free mode or mute the microphone/handset during a conversation. (TRANSFER): Used to transfer a call to another party. (AUTO DIAL/STORE): Used for System/Personal Speed Dialing or storing programme changes. (HOLD): Used to place a call on hold.
-
Page 11: Volume/Lcd Contrast/Ring Tone Settings
3. Enter 2 digits (01-30) using the dial keys (0-9), or press [ ] or [ ] to select the ring tone. 4. Press [ENTER]. 5. Press [CANCEL]. If you hear your own voice through the handset or headset, decrease the volume. For KX-DT521, press V/S[PAUSE/PROGRAM]. For KX-DT521, press [AUTO DIAL/STORE]. -
Page 12: Lcd Backlight
PROG 2. Enter 3. Press [ENTER]. 4. Press a dial key to select the LCD backlight mode. : Automatic : Always ON : Always OFF 5. Press [ENTER]. 6. Press [CANCEL]. For KX-DT521, press V/S[PAUSE/PROGRAM]. For KX-DT521, press [AUTO DIAL/STORE]. -
Page 13: Making Calls
Feature Operations Feature Operations Making Calls Calling MTo an extensionN 1. Go off-hook. 2. Dial an extension number. MTo an outside partyN 1. Go off-hook. 2. Press a flexible CO button. 3. Dial the outside party’s phone number. Redial 1. Go off-hook. 2. -
Page 14: Personal Speed Dialing
6. Press [CANCEL]. MTo dialN 1. Go off-hook. 2. Press the flexible CO button assigned as a One-touch Dialing button. Enter the outside line access number before an outside phone number. For KX-DT521, press V/S[PAUSE/PROGRAM]. For KX-DT521, press [AUTO DIAL/STORE]. -
Page 15: During A Conversation
Feature Operations During a Conversation Call Hold MTo holdN 1. Press [HOLD]. 2. After the confirmation tone, go on-hook. MTo retrieve a call at the holding extensionN 1. Go off-hook. 2. Press a flexible CO button or [INTERCOM]. MTo retrieve an outside call from another extensionN 1. -
Page 16: Do Not Disturb
Feature Operations Setting the Telephone According to Your Needs Do Not Disturb 1. Go off-hook. 2. Enter 3. Press a dial key to select the setting. : Both outside and intercom calls : Outside calls only : Intercom calls only 4. -
Page 17: Multiple Party Conversation
Feature Operations Useful Features Multiple Party Conversation MTo add other parties during a conversationN 1. Press [CONF]. 2. After the confirmation tone, dial the phone number of the party to add. 3. Talk to the new party. 4. Press [CONF]. 5. -
Page 18: Attaching Kx-Dt590 To Kx-Dt543/Kx-Dt546
Installation and Setup Installation and Setup Note R Panasonic assumes no responsibility for injuries or property damage resulting from failures arising out of improper installation or operation inconsistent with this documentation. Attaching a KX-DT590 to the KX-DT543/KX-DT546 The KX-DT590 allows 48 additional Flexible CO buttons to be added to this unit. -
Page 19: Removing The Stand
Gently push the stand in the direction indicated until it locks into place. The stand will be mounted in the high position. Example: KX-DT546 Removing the Stand KX-DT521 Remove the stand in the direction indicated while pushing the catches of the stand with both hands as shown. - Page 20 Installation and Setup Connections The telephone line cord KX-DT521 Connect to a PBX. Connect to: a digital proprietary telephone — Digital XDP connection To a handset jack (handset) Clamp Headset jack KX-DT543/KX-DT546 The telephone line cord Connect to a PBX.
- Page 21 The following headsets can be used with this unit. (Not all operations with the headsets can be guaranteed.) – Wired headsets Panasonic RP-TCA400, RP-TCA430, KX-TCA400 or KX-TCA430 – EHS headsets (KX-DT543/KX-DT546 only) For up-to-date information about headsets that have been tested with this unit, please contact your dealer.
-
Page 22: Wall Mounting
R When mounting the KX-DT543/KX-DT546 with a KX-DT590 on a wall, only ONE KX-DT590 can be attached. Insert the tabs of the wall mounting adaptor into the designated openings in the base, and then slide the wall mounting adaptor in the direction of the arrow until it clicks. KX-DT521 KX-DT543/KX-DT546 with KX-DT590... - Page 23 Wall Mounting Fasten the wall mounting adaptor(s) to the base with the screw(s). (Recommended torque: 0.4 N·m [4.08 kgf·cm] to 0.6 N·m [6.12 kgf·cm]) Connect the cables to the unit, and run the cables through the wall mounting adaptor, as shown in the illustration below. Drive the screws into the wall either 83 mm or 100 mm apart, and mount the unit on the wall.
-
Page 24: Wall Mounting Template
DPT and the 2 screws for the KX-DT590, as indicated above. This space is abbreviated in this template and must be measured. One screw at either point One screw at either point © Panasonic System Networks Co., Ltd. 2014 PNQX6339YA PP0114MK2036...
Need help?
Do you have a question about the KX-DT521 and is the answer not in the manual?
Questions and answers
how to forward calls from desktop phone to personal phone?
To forward calls from the Panasonic KX-DT521 to your personal phone:
1. Press the FWD/DND key.
2. Enter the extension number followed by ‘#’. For forwarding to an outside number, press 6.
3. Enter 9 plus the outside telephone number as you would dial it from your phone.
Note: Not all users have the feature to forward calls to an outside number.
This answer is automatically generated
I have couple of Panasonic KX-DT521 phones that are not working. Can I simply find new phones online somewhere, plug them in and they should work or is there any programming that needs to take place?
The Panasonic KX-DT521 phones may not work immediately when plugged into a KX-TDA100D system. According to the context, a user experienced an issue where the phone displayed only zeros and could not be registered or accessed for settings. This suggests that additional configuration or compatibility checks, such as ensuring the DLC card firmware version is correct, may be required for proper operation.
This answer is automatically generated
How do I get the red light to go off when there are no messages
How do I turn off the red light when there are no messages