Table of Contents
Advertisement
Chapter 1. System Programming (FF1)
SSD Display Restriction
Software Version: All Versions
Address: FF1 2# 1# 5# (0 or 1)#
Description
This address determines whether the telephone's LCD will display the phone
number actually sent by the DBS when an SSD code is dialed (or redialed
with the REDIAL key). By default, the phone number will display.
This address affects SSD codes 80-89 (or 160-199, in CPC-AII/B Version 7.0
or higher). The phone numbers associated with SSD codes 00-79 (or 000-
159) will always display during dialing, regardless of the setting here.
If SSD Display Restriction is enabled (set to "1" in this address), the text
assigned to the SSD code will display, but the dialed digits will not.
Programming
Related Programming
Override TRS With SSD Numbers: FF1 2# 1# 4# (SSD)#
SSD Name Display: FF1 2# 1# 19# (0 or 1)#
SSD Names: FF6 2# (SSD)# CONF (Name)#
SSD Numbers: FF10 1# (SSD)# (PhoneNo.)#
Page 1-10
FF1 2# 1# 5# (0 or 1)#
0=DBS-dialed digits of SSD are displayed.
1=DBS-dialed digits are not displayed
(only the SSD name is displayed).
SSD Codes Affected By This Address --
80-89 (all CPC versions prior to 7.0)
or 160-199 (CPC-AII/B Version 7.0 or higher)
DBS Manual - Revised April 2000
Section 400-Programming
DBS-2.3/9.2-400
Advertisement
Table of Contents
