Chapter 6. Name and Message Assignments (FF6)
Trunk Name Assignment
Software Version: CPC-AII (all versions); CPC-B Version 2.0 or higher
Address: FF6 5# (Trunk)# CONF (NNNNNN)#
Description
Trunks can be given names of up to 6 characters to help identify the source of
calls. When an inbound call rings at an extension, the trunk name appears on
the top line of the extension's display.
Trunk names can only be assigned via FF6 programming.
Programming
To assign a trunk name ...
To clear a trunk name ...
Notes
Using a DSS Console With AFP. If the Attendant Feature Package (AFP) is
used (available only with CPC-B Version 2.0 to 4.0), the DSS console must
be initially set as type "11" in the Terminal Type address (FF3 ExtPort# 2#),
to enable the keys to perform programming functions.
Page 6-8
FF6 5# (1-64)# CONF (NNNNNN)#
Trunk Number
FF6 5# (1-64)# CONF ON/OFF
Trunk Number
DBS Manual - Revised April 2000
Section 400-Programming
Trunk Text
(up to 6 characters)
DBS-2.3/9.2-400