Table of Contents
Advertisement
Section 400-Programming
Door Phone Tone Type
Software Version: CPC-AII and CPC-B, Version 7.0 or higher
Address: FF1 2# 9# (DoorPhone)# 4# (0 or 1)#
Description
This address specifies the type of tone heard by the called extension when a
visitor presses the door phone button. This applies to door phones connected
to digital extension ports only (not trunk ports).
Programming
Related Programming
Door Phone Ring Assignments: FF1 2# 9# (DoorPhone)# 2# (ExtPort)#
(0 or 1)#
Door Phone Ring Timer: FF1 2# 9# (DoorPhone)# 5# (0-15)#
Door Phone Ring Pattern: FF1 2# 9# (DoorPhone)# 6# (0-5)#
Notes
Reset Requirement. If changing the Tone Type setting, activate the change
by unplugging the door phone from its port and plugging it back in.
DBS-2.3/9.2-400
FF1 2# 9# (1-4)# 4# (0 or 1)#
Door Phone Number
(1-4)
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Tone Type: (heard by extension)
0=Slow chime
1=Fast chime
Page 1-89
Advertisement
Table of Contents
