Co Night Ring Assignments For Hunt Groups - Panasonic DBS-2.3-400 Programming Manual

Chapter 4. Ringing and Hunt Groups (FF4)

CO Night Ring Assignments for Hunt Groups

Software Version: CPC-AII (all versions); CPC-B Version 2.0 or higher
Address: FF4 2# (HuntGrp)# (Trunk)# (0 or 1)#
Description
This program determines which hunt group will receive incoming calls on a
particular trunk when the DBS system is in "Night" mode.
Programming
Related Programming
Hunt Group No Answer Timer: FF1 3# 28# (0-15)#
Hunt Group Pilot Numbers: FF4 3# (1-8)# 1# (11-69 or 101-699)#
Hunt Group Type: FF4 3# (1-8)# 2# (0-2)#
Transfer Extension: FF4 3# (1-8)# 3# (10-69 or 100-699)#
Hunt Group Transfer Timer: FF4 3# (1-8)# 4# (0-32)#
Hunt Group Members: FF4 3# (1-8)# (5-12/20)# (10-69 or 100-699)#
Notes
Night Mode. In CPC-AII/B Version 7.0 and higher, two separate Night
modes are available -- "Night" and "Night 2". This address controls Night
ring assignments (see FF4 9# 1# for "Night 2" ring assignments).
Page 4-6
FF4 2# (79-86 or 151-158)# (1-64)# (0 or 1)#
Hunt Groups 1 thru 8:
CPC-AII or CPC-B
79 -or- 151 for Hunt Group 1
80 -or- 152 for Hunt Group 2
81 -or- 153 for Hunt Group 3
82 -or- 154 for Hunt Group 4
83 -or- 155 for Hunt Group 5
84 -or- 156 for Hunt Group 6
85 -or- 157 for Hunt Group 7
86 -or- 158 for Hunt Group 8
DBS Manual - Revised April 2000
Section 400-Programming
Trunk No. 0=Trunk does not ring.
1=Trunk rings.
DBS-2.3/9.2-400