Table of Contents
Advertisement
Section 400-Programming
FF Key Assignments for Extensions
Software Version: All Versions
Address: FF5 (ExtPort)# (Key)# (Feature)#
Description
Each Flexible Function (FF) key on DBS phones and EM/24 consoles can be
programmed with a feature code. During normal phone operation (not in
programming mode), pressing the FF key performs the feature associated
with the code.
Figures 5-1 and 5-2 (next page) illustrate FF key numbering on a 32-button
phone and on an EM/24 console. A key telephone's FF keys are numbered
left-to-right, starting on the bottom row. An EM/24's FF keys are numbered
bottom-to-top, starting at the left column.
To program FF keys on a DSS console, see the next address.
Programming
To assign a feature to an FF key ...
To clear a feature assignment from an FF key ...
To see an FF key's existing feature assignment, press ...
DBS-2.3/9.2-400
FF5 (1-144)# (1-24)# CONF (Code)#
Key Number
Extension Port
or EM/24 Port
(see figures,
next page)
Note: Not all DBS phones have 24 FF keys available for programming.
For example, a 34-button phone has 24 FF keys and 10 PSD keys;
however, a 22-button phone has only 12 FF keys and 10 PSD keys.
FF5 (1-144)# (1-24)# CONF ON/OFF
Extension Port
ON/OFF CONF [press the FF key]
DBS Manual - Revised April 2000
Chapter 5. FF Key Programming (FF5)
Clears any existing
feature code before
assigning a new one
Key Number
Feature Code
(see table on
page 5-5)
Page 5-3
Advertisement
Table of Contents
