Attendant Override - Panasonic DBS-2.3-400 Programming Manual

Table of Contents

Advertisement

Chapter 1. System Programming (FF1)

Attendant Override

Software Version: CPC-AII (all versions) and CPC-B Version 2.09 or higher
Address:
FF1 2# 1# 28# (0 or 1)#
Description
Use this address to enable or disable the Attendant Override feature, which
allows an Attendant phone to "barge into" a trunk or intercom call in progress
on any extension -- even if the extension has been programmed to block
barge-ins. By default, Attendant Override is enabled.
When a barge-in occurs, all three parties can hear and talk to each other.
Programming
Related Programming
Alert Tone for Busy Override & OHVA: FF1 2# 1# 17# (0 or 1)#
Page 1-36
FF1 2# 1# 28# (0 or 1)#
DBS Manual - Revised April 2000
Section 400-Programming
0=Disables Attendant Override.
1=Enables Attendant Override.
DBS-2.3/9.2-400

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dbs-9.2-400

Table of Contents