Table of Contents
Advertisement
Chapter 3. Extension Programming (FF3)
Extension Class of Service Assignment
Software Version: CPC-AII (all versions); CPC-B Version 3.1 or higher
Address: FF3 (ExtPort)# 35# (0-8)#
Description
Use this feature to assign a Class of Service to an extension.
Each Class of Service contains a unique combination of extension features,
which can be selectively enabled for the Class of Service (see FF1 2# 5#).
When you assign a Class of Service to an extension, you are assigning the
enabled features to the extension.
By default, all extensions are assigned Class of Service "0," which has all
features enabled.
Programming
Related Programming
Extension Class of Service: FF1 2# 5# (1-8)# (1-21)# (0 or 1)#
Notes
Caution When Changing a Class of Service Assignment. If you change an
extension's Class of Service, make sure none of the features are currently
activated on the extension -- or the extension user may not be able to turn off
the feature.
For example, if an extension user has Background Music on when you
reassign the extension to another Class of Service that has Background Music
disabled, the user will not be able to turn it off. (If this occurs, re-assign the
original Class of Service to the extension, then turn Background Music off at
the extension, then assign the new Class of Service to the extension.)
Page 3-40
FF3 (1-144)# 35# (0-8)#
Extension Port
DBS Manual - Revised April 2000
Section 400-Programming
Extension Class of Service 0-8
Default: 0 (all features allowed)
DBS-2.3/9.2-400
Advertisement
Table of Contents
