Chapter 1. System Programming (FF1)
Account Codes
Verified Forced Account Codes
Software Version: CPC-AII (all versions); CPC-B Version 3.1 or higher
Address: FF1 2# 6# (1-100)# 1# (0001-9999)#
Description
Use this address to assign up to 100 four-digit verified account codes. Once
the account codes are assigned, use address FF1 2# 6# (1-100)# 2# (0-7)# to
assign a Toll Restriction Setting (TRS) value to the account code.
Forcing the use of account codes, as well as system verification of the entered
account code, can be enabled or disabled on individual extensions (see FF3
ExtPort# 5#). After verifying the entered account code, the DBS will allow
or disallow an outgoing call based on the TRS type assigned to the account
code. However, if the system does not find a match for the account code in
this address, or if the TRS type restricts it, the user cannot make the call.
Programming
To assign an Account Code ...
To clear an Account Code (reset to **** default) ...
Programming Examples
Assigning 1234 as Account Code 1 ...
To assign "1234" as Account Code 1, enter this address:
Page 1-72
FF1 2# 6# (1-100)# 1# (0001-9999)#
Account Code Entry Number
FF1 2# 6# (1-100)# 1# CONF ON/OFF
Account Code Entry Number
FF1 2# 6# 1# 1# 1234#
DBS Manual - Revised April 2000
Section 400-Programming
Account Code
DBS-2.3/9.2-400