Ringback Tone Transmission - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Ringback Tone Transmission

Software Version: CPC-B Version 4.0 or higher
Address: FF1 8# 4# 6# (Trunk)# 11# (0 or 1)#
Description
Determines whether ringback tone is transmitted from the DBS T1 channel to
the CO.
Set this address to "On" only if the far end does not provide ringback tone.
Programming
Notes
Ordering Tones From Carrier. If a carrier is supplying T1 services, always
order Dial Tone and Ringback Tones from the carrier.
DBS-2.3/9.2-400
FF1 8# 4# 6# (1-64)# 11# (0 or 1)#
Trunk Number (1-64)
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
0=Off
1=On
Page 1-199