Non-Appearing Trunk Hold - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

Non-Appearing Trunk Hold

Software Version: All Versions
Address: FF1 2# 1# 10# (0 or 1)#
Description
This address determines who can pick up trunk calls that are on hold. It
applies to DBS phones that don't have dedicated key appearances for trunk
calls (the phone user can't tell which trunk is being used for incoming or
outgoing calls).
Choose one of the following:
• Exclusive Hold: The call can be retrieved only on the extension where it
• System Hold (default setting): Any extension can pick up the call.
Programming
Notes
Applicable Phone Types. This feature applies to both single-line and digital
telephones.
Number of Trunks That Can Be Held Without Key Appearances. Phones
that do not have a key appearance for trunk calls can only hold one trunk at a
time.
VAU Interaction. If a VAU (Voice Announce Unit) is used, set Non-
Appearing Trunk Hold to "Exclusive Hold" to prevent other extensions from
picking up calls being handled by the VAU.
DBS-2.3/9.2-400
was placed on hold.
FF1 2# 1# 10# (0 or 1)#
0=Exclusive Hold is used for non-appearing trunk calls.
1=System Hold is used for non-appearing trunk calls.
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Page 1-15