Ringback Tone From Ml Keys - Panasonic DBS-2.3-400 Programming Manual

Chapter 3. Extension Programming (FF3)

Ringback Tone From ML Keys

Software Version: CPC-AII (all versions); CPC-B Version 2.0 or higher
Address: FF3 (ExtPort)# 36# (0-2)#
Description
This address determines which tone an extension user will hear when dialing
another extension that has a busy ML key.
The tone selected in this address will be heard only if the called party has
more than one ML key and one of the ML keys is busy.
Programming
Related Programming
ML/MCO Separation: FF3 (ExtPort)# 44# (0 or 1)#
Page 3-42
FF3 (1-144)# 36# (0-2)#
Extension Port
NOTE: Enter the extension port that will hear the tone (the calling
party) -- not the extension with the ML keys (the called party).
DBS Manual - Revised April 2000
Section 400-Programming
0=Ringback tone followed by busy tone.
1=Busy tone.
2=Ringback tone.
DBS-2.3/9.2-400