Wink Start Timer - Panasonic DBS-2.3-400 Programming Manual

Chapter 2. Trunk Programming (FF2)

Wink Start Timer

Software Version: CPC-B Version 2.0 or higher
Address: FF2 (Trunk)# 23# (0-15)#
Description
This timer determines the duration of the "wink" that is sent to the CO
following the CO's seizure of a DID trunk (200 ms by default).
At the conclusion of the wink, the CO transmits the DID digits to the DBS.
Programming
Table 2-3. Wink Start Timer settings
Page 2-22
FF2 (1-64)# 23# (0-15)#
Trunk Number
Setting Value
0 140 ms
1 160 ms
2 180 ms
3 200 ms
4 220 ms
5 240 ms
6 260 ms
7 280 ms
8 300 ms
9 320 ms
10 340 ms
11 360 ms
12 380 ms
13 400 ms
14 420 ms
15 440 ms
DBS Manual - Revised April 2000
Section 400-Programming
Wink Start Timer setting
Default: 3 (200 ms)
(see table below)
DBS-2.3/9.2-400