Table of Contents
Advertisement
Chapter 2. Trunk Programming (FF2)
Outbound DTMF Signal Duration for Auto-Dialed Digits
Software Version: All Versions
Address: FF2 (Trunk)# 15# (1-3)#
Description
This address controls DTMF signal duration when digits are dialed
automatically by the system rather than the user.
Examples of DBS dialing include:
• Redial
• Saved Number Redial
• Speed Dialing
• Adding LCR digits
Programming
Notes
DTMF Tone for Manual Dialing. If you dial manually (press a digit key),
the DTMF tone will emit until the button is released.
Page 2-12
FF2 (1-64)# 15# (1-3)#
Trunk Number
DBS Manual - Revised April 2000
Section 400-Programming
1=75 ms on/50 ms off
2=125 ms on/125 ms off
3=250 ms on/250 ms off
DBS-2.3/9.2-400
Advertisement
Table of Contents
