Extension Delayed Ring Table - Panasonic DBS-2.3-400 Programming Manual

Chapter 4. Ringing and Hunt Groups (FF4)

Extension Delayed Ring Table

Software Version: CPC-AII (all versions); CPC-B Version 2.0 or higher
Address: FF4 8# (TargetExtPort)# (SourceExtPort)# (0 or 1)#
Description
DSS/BLF keys can be programmed (in FF5) to flash whenever other
extensions receive incoming calls. Use this address to program the DSS/BLF
phone to also ring for these incoming calls on a delayed basis.
If the incoming call is unanswered at the ringing extension, the DSS/BLF
phone will begin ringing (and the first extension will stop ringing) after a
certain period of time.
The DSS/BLF phone user can answer the call by pressing the flashing DSS/
BLF key.
Programming
Related Programming
Extension (BLF) Delayed Ring: FF1 2# 1# 30# (0 or 1)#
Extension (DSS/BLF) Delayed Ring Timer: FF1 3# 27# (0-15)#
DSS/BLF Key Programming: FF5 (1-144)# (1-24)# CONF PROG (10-69
or 100-699)#
Notes
Timing For Extension Delayed Ringing. The period of time that passes
before the system begins ringing the unanswered call on the DSS/BLF
extension, depends on the CPC version:
• CPC-AII (all versions); CPC-B Version 3.1 or higher: Extension
• CPC-B Versions prior to 3.1: Call Forward-No Answer Timer -- FF1 3#
Page 4-26
FF4 8# (1-144)# (1-144)# (0 or 1)#
Extension Port with
DSS/BLF Keys
Delayed Ring Timer -- FF1 3# 27# (0-15)#
19# (0-15)#
DBS Manual - Revised April 2000
Extension Port
receiving calls
(unanswered extension)
Section 400-Programming
0=Do not delay-ring
the DSS/BLF phone.
1=Delay-ring the
DSS/BLF phone.
DBS-2.3/9.2-400