System Timers; Automatic Night Mode Start Time - Panasonic DBS-2.3-400 Programming Manual

Section 400-Programming

System Timers

Automatic Night Mode Start Time

Software Version: All Versions
Address: FF1 3# 1# (0000-2359)#
Description
Set the time when the DBS will automatically switch from Day to Night
mode. Use the 24-hour military time format (e.g., enter "1700" for 5:00 pm).
You can program trunks to ring incoming calls at different extensions when
the system is in Night mode (see FF4 addresses). And different TRS types
can be programmed to be used during Night mode (see FF8 addresses).
NOTE: Starting with Version 7.0 of the CPC-AII and CPC-B cards, a
second Night mode is also available -- see FF1 3# 30# for more information.
Programming
To set the Automatic Night Mode start time ...
To clear the start time (disable Automatic Night Mode) ...
Related Programming
Time Setting: FF1 1# 2# HHMM#
Automatic Day Mode Start Time: FF1 3# 29# HHMM#
Automatic Night 2 Mode Start Time: FF1 3# 30# HHMM#
CO Ring Assignments: FF4 addresses
Toll Restriction: FF8 addresses
Notes
System Clock. The Automatic Night Mode start time depends on the DBS
system clock being set correctly.
DBS-2.3/9.2-400
FF1 3# 1# (0000-2359)#
FF1 3# 1# CONF ON/OFF
DBS Manual - Revised April 2000
Chapter 1. System Programming (FF1)
Night Mode Start Time
(in 24-hour military format)
Page 1-93