Disconnect Signal; High Priority Message Waiting; Message Key Id Code - Panasonic S-ICX Technical Manual

Chapter 3. System Features
• Only one Voice Mail ID Code is available for the system.

Disconnect Signal

Either busy tone or silence can be sent to a third-party voice mail system when the caller hangs up.

High Priority Message Waiting

Message waiting displays and LEDs may be utilized by the Voice Mail system to indicate that a Voice
Mail message has been left in your mail box. When you retrieve the message, the message waiting
indications are cleared.
Hardware Requirements
• N/A
Considerations
• For more information on setting and retrieving message waiting, see the telephone operation
sections that follow in this document.

Message Key ID Code

On a large-display phone you can use a Message key (labelled MSG) to either retrieve Voice Mail
messages or respond to telephone messages. When responding to Voice Mail messages from a 3rd
party Voice Mail system, the Message key needs to have an ID code set to identify the caller to the
Voice Mail system. You can also use the Message key to program a Voice Mail password.
You must program the Message key using the User Maintenance feature "Set Message Key ID Code"
on page 86.
Operation
To retrieve a message at Voice Mail:
1. Press the MSG key.
2. Follow the Voice Mail instructions for retrieving messages.
3. When finished retrieving messages, replace the handset or
press the ON/OFF key.
Hardware Requirements
• N/A
Considerations
• N/A
70
Action
S-ICX (International) issued October 2000
Section 700 - Operation
Result
Voice mail instructions
S-ICX-50-700