Brocade Communications Systems Brocade 8/12c User Manual page 774

24
Port VLANs
3. Enter a VLAN ID in the Configure VLANs field.
4. Click the Load Products button. Products that already have the entered VLAN IDs configured on
5. Under the Available Products list, select one or more products to which the VLAN will be
6. Click the right arrow button to move your selection to the Selected Products list.
7.
8. In the Available Ports list, select the interfaces that you want to assign to a VLAN.
9. In the Select VLANs list, select the VLAN you want to assign to the selected interfaces. The list
10. Complete one of the following tasks.
11. Click the Select Classifiers button to launch the Select Classifier Groups dialog box, shown in
730
You can enter more than one ID, separating individual IDs with a comma (for example, 10, 45,
79, 30). You can also enter ranges of VLAN IDs (for example, 41-51).
them are automatically moved to the Selected Products panel. The Load Products button is
disabled by default.
assigned. You can also use the Search tool to find ports.
Expand the folder for a selected product in the Available Ports list to display all the interfaces
or trunk groups on the product that can be added to the VLAN.
The Selected Ports list displays the list of configured VLANs. Initially these VLANs contain no
ports. If no ports or trunk groups are selected, an empty VLAN is created on the products (DCB
products only). If no ports are selected for IOS products, an error message displays.
If you place your pointer over an interface in the Available Ports list, a tool tip appears, showing
the VLAN assignment of the interface. You can also use the Search tool bar to search for ports
under the Available Ports list, then assign the ports found to the VLAN.
includes the Default VLAN (VLAN1) and the VLAN or VLANs you are currently creating. You can
assign one or more VLANs to the selected ports.
In the Selected Ports list, each VLAN node is shown as Tagged, Untagged, or Converged. If a
port is already tagged in one VLAN, it can be marked as Tagged in other VLANs. The port can
also be marked as Untagged in other VLANs, which changes its mode to Dual mode.
•
If you want to assign the interface to the VLAN as an untagged port, click Untag.
•
If you want to assign the interface to the VLAN as a tagged port, click Tag.
•
If you want to make the VLAN on the interface dual-mode, assign that interface as Tagged
and select the same interface and assign as Untagged to another VLAN. Dual mode ports
can be added to any VLAN except for the default (VLAN 1).
NOTE
Check the release notes for your product to determine the VLAN support available on that
product.
The Select Classifiers button is disabled by default. To enable the button, select a single row in
the Selected Ports list.
Figure 335, where you can assign classifiers and rules for supported DCB platform-based
VLANs.
Brocade Network Advisor SAN User Manual
53-1002167-01