Setting Factory Default - Agilent Technologies U1701B User's And Service Manual

3 Default Setting Configurations

Setting Factory Default

Table 3- 2
Table 3-2 Outline of setup menu items
34
lists out the setup menu item and factory default settings.
Menu item Factory Setting
bAUd
PArt
Data
Echo
Prnt
beep
LbUt
AoFF
blit
boFF
bon
dEFA
Press SAVE key to implement the above settings.
N O T E
9600 Baud rate: 2400, 4800, 9600, 19200
none Parity: odd, even or none
8-b 8 bits or 7 bits (Stop bit is always 1 bit)
oFF Echo: on or oFF
oFF Print: on or oFF
4800 Driving frequency: 4800, 2400, 1200, 600 Hz. oFF
means to disable beep.
oFF Lock keys, oFF: enable keypad
on: disable keypad
15 1~99 minutes, oFF means to disable auto power
off.
30 1~99 seconds, oFF means to disable turning off
backlight automatically.
oFF Bright level of backlight at OFF state: oFF~09
09 Bright level of backlight at ON state: oFF~09
rSt Reset above item to factory original setting.
Selectable Parameters
U1701B User's and Service Guide