Default Factory Settings And Available Setting Options; Table 4-2 Default Factory Settings And Available Setting Options For Each - Agilent Technologies U1211A User's Manual And Service Manual

4 Changing the Default Settings

Default Factory Settings and Available Setting Options

Default Factory Settings and Available Setting Options

The following table shows the various menu items with their respective
default settings and available options.
Table 4-2 Default factory settings and available setting options for each feature
Feature
0.5 Hz
4800
500
15
30
AC
rESt
66
Default factory Available setting options
setting
Minimum frequency measurement settings.
• Available settings: 0.5 Hz, 1 Hz, 2 Hz, or 5 Hz.
Beep frequency.
• Available options: 600 Hz, 1200 Hz, 2400 Hz, 4800 Hz, or OFF.
Refresh hold.
• To enable this function, select a value within the range of 100 to 1000.
• To disable this function, select OFF.
Note: Select OFF to enable data hold (manual trigger)
Automatic power-off.
• To enable this function, select a value within the range of 1 minute to
99 minutes.
• To disable this function, select OFF.
Sets the timer to automatically turn off the LCD display backlight.
• To enable this function, select a value within the range of 1 minute to
99 minutes.
• To disable this function, select OFF.
Initial current or voltage measurement.
• To make AC measurement as the initial measurement, select AC.
• To make DC measurement as the initial measurement, select dC.
Note:
• The default initial measurement of U1211A, U1212A, and U1213A is AC
measurement.
Default factory settings.
Select REST to reset the clamp meter to its default factory settings.
User's and Service Guide