Unconfigure Diffserv Replacement Ports - Extreme Networks ExtremeWare Command Reference Manual
Version 7.7
Hide thumbs
Also See for ExtremeWare:
- Command reference manual (2546 pages) ,
- Command reference manual (2254 pages) ,
- Command reference manual (1598 pages)
Table of Contents
Advertisement
QoS Commands
unconfigure diffserv replacement ports
unconfigure diffserv replacement ports [<portlist> | all]
Description
Removes the DiffServ replacement mapping from a port.
NOTE
This command is available only on the "i" series switches.
Syntax Description
portlist
Specifies a list of ports or slots and ports. May be in the form 1, 2, 3-5, 2:5, 2:6-2:8.
all
Specifies that DiffServ replacement mapping should be removed from all ports.
Default
N/A
Usage Guidelines
None
Example
The following command removes DiffServ replacement from ports 5-8:
unconfigure diffserv replacement ports 5-8
History
This command was first available in ExtremeWare 6.0.
Platform Availability
This command is available on the "i" series platforms only.
470
ExtremeWare 7.7 Command Reference Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the ExtremeWare and is the answer not in the manual?