Configure Wireless Ports Interface Max-Clients - Extreme Networks ExtremeWare Command Reference Manual

configure wireless ports interface max-clients

configure wireless ports [<portlist> | all] interface [1 | 2] max-clients
<value>
Description
Sets the maximum number of clients that can connect simultaneously to a wireless interface.
Syntax Description
portlist
all
interface
value
Default
100.
Usage Guidelines
Use this command to limit the number of clients that can connect on any interface: 1 or 2.
Example
The following example sets the maximum client level to 72 for port 15 and interface 1:
configure wireless ports 15 interface 1 max-clients 72
History
This command was first available in ExtremeWare 6.2a and added to the "i" series in 7.3.0.
Platform Availability
This command is available on Alpine 3800 series only.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies one or more ports or slots and ports. On a modular switch, can be a
list of slots and ports. On a stand-alone switch, can be one or more port
numbers. May be in the form 1, 2, 1:2, 3-5.
Specifies all ports.
Specifies an interface: 1 or 2.
Specifies the maximum number of clients that are allowed to connect
simultaneously. Valid values are from 0 to 128. The default value is 100.
configure wireless ports interface max-clients
2029