Honda S2000 Service Manual page 567

EPS Components
Steering Gearbox Removal and Installation (cont'dl
16. Disconnect the torque sensor 3P connector (A).
After disconnecting the connector, put a piece of
tape over the steering gearbox connector to protect
it from dust, dirt, and foreign materials.
'17.
Remove the four gearbox mounting bolts.
Right side:
Left side:
f,
H
--'\-r:
-=.1'lt'
.'€ii,,ir'
) t---:,tA
17-48
18. Pullthe steering gearbox toward the front. Move
the steering gearbox to the passenger's side and
remove it.