Driveline/Axle
Driveshafts Removal (cont'dl
7. Remove the ABS sensor harness (A) from the
u p p e r a r m ,
A
Make reference marks (A) across the inboard joint
(B) and the rear differential (C).
9 . Remove the six inboard joint mounting bolts (D)
and nuts (E), then remove the inboard joint from
the rear differential.
Pull the knuckle outward, and remove the inboard
joint from the rear differential.
' 1 0 .
16-4
1 1 . P u l l t h e k n u c k l e o u t w a r d , a n d r e m o v e t h e
driveshaft outboard joint from the wheel hub using
a plastic hammer.
12. Remove the driveshaft.