Hardtop Striker Replacement
NOTE:
' To remove and install the hardtop striker, removethe
roof from the body.
. Take care not to scratch the interior parts.
1. Remove the windshield header interior trim (see
page 20-68).
2. Remove the hardtop striker as shown.
3. Inslallthe striker in the reverse order of removal.
Fastener Locations
A > : S c . € w , 2
f!,\:r.-r
\a*
6 x 1 . 0 m m
'16 N.m
{1.7 ksf.m, 12lbf.ftl
Body Side Catch Assembly
Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the roof from the body. Take care not to
bend or scratch the trim and panels.
2. Remove the rear side tirm (see page 20-70).
3. On left side, detach and disconnect the connector
(A), then detach the harness clip (B).
Fastener Locations
C > : B o l r , 2 D > : B o l t . 2
4.
Remove the bolts (C, D), then remove the body side
catch assemblv {E).
(cont'd)
20-63