Honda S2000 Service Manual page 465

13. Tighten the 8 mm flange bolts in a crisscross
pattern in several steps.
8 x 1 . 2 5 m m
27 N.m {2.8 kgf.m,20lbf ft)
14. Lower the shift rod (A), then install the shift arm B
(B), spring washer (c), and 8 mm special bolt.
1 5 . I n s t a l l t h e s h i f t l e v e r h o u s i n g .
6 x 1 . 0 m m
9.8 N.m (1.0 kgt,m.7.2lbt.ft)
13-65