Dust And Pollen Filter Replacement - Honda S2000 Service Manual

Heating and Air Conditioning
Heater Unit/Core Replacement
(cont'dl
15. Installthe heater core in the reverse order of
removal.
'16.
lnstallthe heater unit in the reverse order of
removal, and note these items:
. Do not interchange the inlet and outlet heater
hoses, and installthe hose clamps securely.
. Refillthe cooling system with engine coolant (see
page 10-8).
. Adjust the heater valve cable (see page 21-43).
. Make sure that there is no coolant leakage.
. Make sure that there is no air leakage.
. For evaporator and Ay'C-related information, refer
to blower /evaporator unit removal and
installation (see page 21-38).
. Do the ECM idle learn procedure
{ s e e p a g e 1 1 - 1 0 0 ) .
. Enter the anti-theft code for the radio, then enter
the customer's radio station presets.
. For'01-03 models, reset the clock.
21-42
4. lnstall the filter in the reverse order of removal
Dust and Pollen Filter Replacement
The dust and pollen filter should be replaced every
30,000 miles under normal conditions, or every 15,000
miles under extremely dusty or sooty conditions.
Reolace the filter more often if the air flow is less than
u s u a L
1 . O p e n t h e h o o d .
2. Remove the clips (Aland the hood seal (B). Liftthe
right side of the cowl cover (C) up, and remove the
dust and pollen filter (D) as shown. Be careful not to
damage the hood seal when removing the clips.
C B
Remove the filter (A)from the housing (B). Replace
the filter.