Charging System
Auto-Tensioner Inspection/Replacement (cont'dl
6. Remove the auto-tensioner.
8 x 1.25 mm
8 x 1.25 mm
22 N.m {2.2 kgf.m, 16lbl'ft)
22 N.m (2.2 kgt.m, 16lbf ftl
7. lf necessary. to remove the pulley bolt, secure the
auto-tensioner in a bench vise with soft jaws. To
prevent damage to the tensioner, always use soft
jaws or equivalent materials between the tensioner
a n d t h e v i s e .
4-28
\.
8. Remove the pulley bolt (left-hand threads), and
replace the tensioner pulley,
(i1.3 kgf.m.31 lbl.ftl