Honda S2000 Service Manual page 143

',1
/
21. Remove the cylinder head cover,
Set the No. 1 piston at top dead center {TDC). The
TDC marks (A) on the cam chain sprocket should
align with the cylinder head surface.
22.
.-j,r.a.-\i,
l - t l L
' - - /
23.
Remove the end cover (A) and nozzle (B) from the
cam chain auto-tensioner.
A B
Thread a nut {A) onto a 5 x 0.8 mm bolt that is at
least 40 mm long (B), then thread the bolt into the
maintenance hole in the cam chain auto-tensioner.
24.
25. Turn the bolt clockwise to compress the cam chain
auto-tensioner, and lock the bolt with the nut.
(cont'd)
6-29