Camshaft Gear Removal - Honda S2000 Service Manual

31. Remove the cylinder head bolts. To prevent
warpage, unscrew the bolts in sequence 1/3 turn at
a time; repeat the sequence until all the bolts are
roose.
32. Remove the cylinder head.
2 .
Camshaft Gear Removal
1 . Remove the dipstick, positive crankcase ventilation
(PCV) hose and breather hose (see step 18 on page
6-28).
Remove the ignition coil cover, then remove the
ignition coils (see step 19 on page 6-28).
Remove the cylinder head cover (see step 21 on
page 6-29).
Loosen the rocker arm adjusting screws (see step
27 on page 6-30).
Remove the camshaft holders and camshafts.
Hold the camshaft with an open-end wrench, then
loosen the camshaft gear mounting nut.
7. Remove the camshaft gear.
6-31