Trunk Lid Adjustment - Honda S2000 Service Manual

Trunk Lid
a
1 .
2 .
Adjustment
Slightly loosen each bolt.
A d j u s t t h e t r u n k l i d a l i g n m e n t :
. Adjust the trunk lid right and left, as well as forward and rearward, by using the elongated holes on the trunk lid
h i n g e s ( A ) .
. Turn the trunk lid edge cushions (B) in or out as necessary. to make the trunk lid fit flush with the body at the
rear and side edges.
. Adjust the fit between the trunk lid and the trunk lid opening by moving the striker (C).
6 x '1.0 mm
9.8 N.m (1.0 kgf.m,
7.2 tbf.ftt
6 x 1 . 0 m m
9.8 N.m (1.0 kgf.m,
1.2 tbt.ttl
*'.*:':-''''
i -
3. Tighten each bolt securely.
4. Make sure the trunk lid opens properly and locks securely.
5. Apply body paint to the trunk lid mounting bolts and around the hinges.
/.1 /
/,/;,/.,/i
20-97