Disconnecting System Connectors - Honda S2000 Service Manual

Disconnecting System Connectors
Before removing the airbag or SRS related devices (the SRS unit, the cable reel, and the seat belt tensioner
connectors), disconnecting connectors from related devices, or removing the dashboard or the steering column,
disconnect the airbag connectors and seat belt tensioner connectors to prevent accidental deployment.
Turn the ignition switch OFF, disconnect the negative cable from the battery, and wait at least 3 minutes before
beginning the following procedures.
. B e f o r e d i s c o n n e c t i n g t h e S R S u n i t c o n n e c t o r ( 1 8 P )
( A ) f r o m t h e S R S u n i t , d i s c o n n e c t b o t h a i r b a g 2 P c o n n e c t o r s ( C ,
D) and both seat belt tensioner 2P connectors (E, F).
. Before disconnecting the cable reel 2P connector (B), disconnect the driver's airbag 2P connector (C).