Driver's Window Motor Test; Passenger's Window Motor Test - Honda S2000 Service Manual

t
Driver's Window Motor Test
Moior Test:
1. Remove the driver's door panel (see page 20-4).
2. Disconnect the 4P connector from the window
moror.
Test the motor in each direction by connecting
battery power and ground according to the table.
When the motor stops running, disconnecl one
lead immediately.
\
Terminal
or**r""
I]
1
2
UP
o
o
DOWN @
o
4, lf the motor does not run or fails to run smoothly,
reptace tt.
Detect Circuit Test;
5. Connect the test leads of an analog ohmmeter to
t h e N o . 3 a n d N o . 4 t e r m i n a l s .
6. Run the motor by connecting power and ground to
t h e N o . 1 a n d N o . 2 t e r m i n a l s . T h e o h m m e t e r
needle should move back and fonh alternately. lf it
does not, replace the motor.
1 .
Passenger's Window Motor Test
Remove the passenger's door panel (see page 20-
4 t .
Disconnect the 2P connector from the window
moIor.
Check window motor operation by connecting
power and ground according to the table. When the
motor stops running, disconnect one lead
immediately,
\
Telminal
Direction
1
2
U P @
o
DOWN
o
o
lf the motor does not run or fails to run smoothly,
replace it.
22-129