Honda S2000 Service Manual page 437

4. Measure distance O on the distance cottar.
. lf distance O is notwithinthe standard, replace
the distance collar wilh a new one.
. l f d i s t a n c e O i s w i t h i n t h e s t a n d a r d , g o t o s t e p 5 .
Standard: 28.03 28.08 mm (1.104 1.106 in.l
5. Measure the thickness of 1st gear.
. l f t h e t h i c k n e s s o f 1 s t g e a r i s l e s s t h a n t h e s e r v i c e
limit, replace 1st gear with a new one.
. lf thethickness of 1st gear iswithin the service
limit, replace the 1sV2nd synch ro hub with a new
o n e .
Standard: 31.18 - 31.26 mm {1.22A- 1-231 in.l
Service Limit: 31.06 mm {1.223 in.)
6. Measure the clearance between reverse gear (A)
and the distance collar {B). lf the clearance is more
than the service limit, go to step 7.
Standard: 0.04-0.22 mm (0.002-0.009 in.)
Service Limit: 0.3 mm (0.012 in,.
Measure distance @ on the distance collar.
. lf distance @ is notwithin the standard, replace
the distance collar with a new one.
. l f d i s t a n c e O i s w i t h i n t h e s t a n d a r d , g o t o s t e p 8 .
Standard: 25.53 25.58 mm {1.005 1.007 in.)
7 .
(cont'd)
13-37