Cam Chain Installation
Special Tools Required
. Holder handle 07JAB-0010204
. Holder attachment,50 mm 07JAB-0010404
. Socket, 19 mm 07JAA-001020A
or a commercially available '19 mm socket
1. Set the crankshaft sprocket so that the No. 1 piston
is at top dead center (TDC). Align the key (A) on the
sprocket and crankshaft with the pointer (B) on the
cvlinder block.
2. Install the cam chain with the colored piece (A)
aligned with the punch mark (B) on the crankshaft
sDrocKel.
3 . I n s t a l l t h e o i l p u m p c h a i n g u i d e .
6 x 1 . 0 m m
1 2 N . m
{1.2 kgf.m,8.7 lbf.ftl
(cont'd)
6-19