9. With the specified air pressure applied and the
piston at TDC, move the secondary rocker arm (A).
The mid rocker arm (B). primary rocker arm (C) and
secondary rocker arm should move together. lf the
three rocker arms do not move together, replace
the rocker arms as a set.
Remove the special tools.
Tighten the camshaft holder bolts to 22 N m
(2.2 kgf.m, 16 lbf.ft).
Installthe cylinder head cover (see page 6-53).
1 0 .
1 1 .
6 - 1 1