Table of Contents
Advertisement
Precautions for Torsen Type
Limited Slip Differential (LSD)
. The Torsen differentials are mechanical limited slip
differentials which deliver the available Dower to the
wheels and axles with the most grip or resistance as
the engine torque output increases.
. Avoid repair procedures that require the engine
running with one rear wheel raised; such as an on-
car-wheel balancer.
. Do not tow the vehicle with the rear wheels on the
g rou no.
. Never dismantle any part ofthe differential other
than right and left tapered roller bearings.
. To optimize the Torsen differentials, equip your
vehicle with rear tires of the same brand. the same
size, and with even wear.
Torsen Type Limited Slip
Differential (LSDI Operational Check
The Torsen type limited slip differential (LSD)
distributes optimum power between the two driving
axles according to the difference in torque demanded
by the driving wheels. U nder no circumstances should
the engine be started with either wheel raised off the
ground, such as using an on-car-wheel balancer or
when transporting the vehicle in the event of accident.
1. Set the parking brake, and block the rear wheels.
2. Raise the rear ofthe vehicle, and make sure it is
securely supported.
3. With the engine off. shift the transmission into 1st
gear, and release the parking brake.
4. Rotate either rear wheel by hand, and check that
the other wheel rotates in the oDDosite direction.
Check both wheels.
5. lf the opposite rear wheel does not rotate, or if you
c a n n o t s p i n t h e r e a r w h e e l s a t a l l , t h e l i m i t e d s l i p
differential is faulty and should be replaced.
15-3
Advertisement
Table of Contents
Troubleshooting
