Wiper Motor Replacement - Honda S2000 Service Manual

WiperlWasher
I
4
Wiper Motor Replacement
1 . Open the hood, and remove the cap nuts and the
wrper arms.
2.
?
Remove the hood seal and cowl cover.
Disconnect the 5P connector (A) from the wiper
motor (B).
4. Remove the bolts, then remove windshield wiper
l i n k a g e a s s e m b l y ( C ) .
1 0 x 1 . 2 5 m m
18 N m {1.8 kgf.m, 13lbf.ftl
6 x 1 , 0 m m
9.8 N.m (1.0 kgf m, ?.2 lbf.ft)
22-114
J
5. Remove the three mounting bolts and nut from the
wiper linkage (A) to remove the wiper motor (B).
6. Install in the reverse order of removal, and note
these items:
. Grease all moving parts.
. Before reinstalling the wiper arms, turn the wiper
switch oN, then OFF to return the wiper shafts to
the park position.
. lf necessary, replace any damaged clips
. Check the wiper motor operation,
{1.5 kgf.m,11lbf.ftl