Honda S2000 Service Manual page 1044

14. Read the DTC.
ls DTC 1-5 indicated?
YES - Go to slep 15.
NO Shortto ground in the cable reel; replace the
cable reel (see page 23-72).I
15. Turn the ignition switch OFF, then djsconnect the
battery negative cable, and wait for 3 minutes.
16. Disconnect the passenger's airbag 2P connector (A)
and both seat belt tensioner 2P connectors (B).
17. Disconnect the SRS unit 18P connector (A) from the
S R S u n i t .
Disconnect the special tool from the SRS main
h a r n e s s .
Check resistance between the No. 1 terminal of the
SRS unit 18P connector and body ground, and
between the No. 13 terminal and body ground.
There should be an open circuit, or at least 1 M e .
SRS UNIT 18P CONNECTOR
1 8 .
1 9 .
Wire side of Iemale terminals
ls the resistance as specified?
YES Faulty SRS unit; replace the SRS unit (see
p a g e 2 3 - 7 5 ) . I
N O - S h o r t t o g r o u n d i n t h e S R S m a i n h a r n e s s ;
r e p l a c e t h e S R S m a i n h a r n e s s . l
23-31