Convertible Top
Rear Window Replacement (cont'd)
22. Secure the lower part of the rear window (A) to the
lower part of the convertible top cloth (B) with new
two-piece brass rivets (C).
Attach the convertible top cloth, rear window, and
rain rail together with new pop rivets and washers.
Make sure the crush end of each rivet is facing the
rear of the car when the rain rail is sifting in place.
3 / 1 6 ' x 3 / 8 "
3 1 1 6 x 1 1 2 '
3 / 1 6
A > :
R i v e t , 3 B > :
R i v e t , S
C > :
W a s h e r , 1 1
23.
0
20-46
2 4 . Setthe rain rail in position, and install the clips
between the quarter panel and the roof.
Reinstallthe left side convertible top retainer (A),
right side convertible top retainer (B), and rear
lower convertible top retainer (C).
Fastener Locations
O : N u t , 1 1
6 x 1 . 0 m m
9.8 N.m
{1.0 kgl.m, 7.2lbf ft}
2 6 . R e i n s t a l l a l l r e m a i n i n g i n t e r i o r c o m p o n e n t s a n d
t r i m p i e c e s .
27. Check for water leaks (see step 17 on page 20-14).