Doors
Door Glass Adjustment (cont'dl
9. Adjust clearance "H" as follows:
-1 Loosen the bolts (A) securing the stop plates (B).
-2 Loosen the bolts (Clsecuring the glass {D).
-3 Move the glass up or down, as well as, forward and rearward to align it with the retainer and molding. Move
the glass until clearcnce "H" is within the specified limits.
-4 Tighten the bolts securing the glass.
-5 Press the stop plates against the glass stops (E).
-6 Fasten the stop plates. Check that the stop plates contact the glass stops evenly.
A
8 x 1.25 mm
22 N,m 12.2 kbt.rn,
16 rbr.ftl
"H" Clearance
c
6 x 1 . 0 m m
8 N.m {0.8 kgf.m,
6 tbf.ft)
.\\
) : .
'-.i...\
.t\.
: ...//.\
t r ' '
20-12