Countershaft Disassembly - Honda S2000 Service Manual

Manual Transmission
Countershaft Assembly Clearance
lnspection (cont'dl
8. fvleasure the thickness of reverse gear.
. lf the thickness of reverse gear is less than the
service limit, replace reverse gear with a new one.
. lf thethickness of reverse gear is within the
service limit, replace the reverse synchro hub
with a new one.
Standard: 26.38 26.46 mm (1.039 1.042 in.)
Service Limit: 26.26 mm (1.034 in.)
13-38
Countershaft Disassembly
1. Remove the
Remove the inner race (A) using a commercially
available bearing separator and a press as shown.
needle bearing.
@
P
ruW
ffi