Honda S2000 Service Manual page 492

Rear Differentaal
Differential Reassembly (cont'd)
6. Apply lubricant to the tapered roller bearing, then
install the drive pinion and pinion spacer into the
differential carrier housing.
7. Apply lubricant to the tapered roller bearing, then
install the lapered roller bearing and thrust washer
(A) using the special tools while holding the drive
p i n i o n ( B ) .
46-0030100
07746-0030300
15-20
8 . I n s t a l l t h e o i l s e a l u s i n g t h e c o m p a n i o n f l a n g e a n d
soecial tool as shown.
46-0030100
9 . Apply molybdenum grease to the surface end of
t h e c o m p a n i o n f l a n g e , t h e n i n s t a l l t h e c o m p a n i o n
flange, drive pinion washer. and locknut.
, t V . ,