Honda S2000 Service Manual page 765

Dashboard
Dashboard Removal/lnstallation (cont'd)
7. From outside the doors. remove the caps (A), then remove the bolts (8, C, D) and screws {E), and lift up on the
dashboard (F) to release it from the guide pins (G ). Take care not to scratch the center console and shift knob.
Fasten6r Locations
A > : B o l t , 2 B > : B o l t , 2 C 2 D > : S c r o w , 2
{1\
> : Bolt,
(ttrm (ii DtE
6 x 1 . 0 m m
9.8 N.m 11,0 kgt.m,
7.2 tbt.ttl
'
\*
6 x 1 . 0 m m
9.8 N.m {1.0 kqf.m,
7.2 tbt.ftl
Carefully remove the dashboard through the front door opening.
lnstall the dashboard in the reverse order of removal, and note these items:
. Make sure the dashboard fits onto the guide pins correctly.
. Before tightening the bolts, make sure the dashboard wire harness and steering hanger beam wi
not pinched.
. Make sure the connectors are plugged in properly.
. Reconnect the negative cable to the battery.
. Enter the anti-theft code for the radio, then enter the customer's radio station presets.
. Reset the clock
. D o t h e P C M i d l e l e a r n p r o c e d u r e ( s e e p a g e 1 1 - 1 0 0 ) .
re narness are
20-84
\