10. Disconnectthe driver's airbag connector (A),
passenger's airbag connector {B), and passenger's
seat belt tensioner connector (C).
,
/
:
---------:-\
J
23-43
12.
1 1. Disconnect the SRS unit 18P connector (A) from the
SRS unit.
Oisconnect the special tool from the SRS main
harness.
Reconnect the battery negative cable.
Turn the ignition switch ON (ll).
Check for voltage between the No. 4 terminal of the
SRS unit 18P connector and body ground. and the
No. 11 terminal and body ground. There should be
0.5 V or less.
SRS UNIT 18P CONNECTOR
Wire side of female terminals
ls the voltage as specitied?
YES-Faulty SRS unit; replace the SRS unit (see
page 23-75).I
NO Short to power in the SRS main harness;
r e p l a c e t h e S R S m a i n h a r n e s s . l
1 3 .
1 4 .
1 5 .