Honda S2000 Service Manual page 469

18. Install the wire harness (A) onto the transmission,
then connect the heated oxygen sensor (H02S) (B),
secondary heated oxygen sensor (secondary
HO2S) {C), and the back-up light switch (D)
connectors.
x 1 . 2 5 m m
24 N.m
{2.4 kgf.m.
17 rbf.ft)
19. lnstallthe intake manifold bracket (A) lower
mounting bolt, then lnstall the wire harness (B) on
the intake manifold bracket.
10 x 1.25 mm
,tl N.m
14.5 kgf.m.
33 tbt.ft)
21
20. Reconnect the torque sensor 3P connector (A), and
i n s t a l l t h e w i r e h a r n e s s c l a m p ( B ) .
Reconnect the 2P connector (C) to the steering
gearbox (D).
I n s t a l l t h e s p l a s h s h i e l d .
(cont'd)
13-69