Honda S2000 Service Manual page 183

Scored or scratched cylinder bores must be honed.
Check the top of the block for warpage. Measure
along the edges and across the center as shown.
Engine Block Warpage:
Standard (New): 0.07 mm (0.003 in.l max.
Service Limit:
0.10 mm (0.004 in.l
PRECISION STRAIGHT EDGE
7. Calculate the difference between the cylinder bore
diameter and the piston diarneter. lf the clearance
is near or exceeds the service limit, inspect the
Diston and cvlinder block for excessive wear.
Piston-to-Cylinder Clearance:
Standard {New): 0.004 0.027 mm
(0.0002 0.0011 in.)
Service Limit: 0.04 mm {0.002 in.)
+l<
BlsJAo#-Io-cYLrNDER
7-15