Honda S2000 Service Manual page 409

a
21. Remove the exhaust manifold bracket (A) and the
e x h a u s t m a n i f o l d ( B ) .
2 2 .
23.
Remove the propeller shaft (see page 16-17).
Remove the four shift boot holder mounting bolts.
24, Remove the release fork boot (A), then carefully
remove the slave cylinder (B). Do not operate the
clutch pedal once the slave cylinder has been
removed.
Pull out the release fork (A) from the release fork
hanger. Wedge a shop towel (B) between the
opening in the clutch housing and the release fork
to hold the release fork in place.
(cont'd)
13-9