DTC Pl410: Air Pumo Malfunction
1 . R e s e t t h e E C M { s e e p a g e 1 1 - 4 ) .
2. Make sure the engine coolant temperature is over
32 'F (0"C) and below 158 'F (60'C) with the scan
tool.
Start the engine. While the air pump operates, let
the engine idle with no load (in neutral) for at least
1 0 s e c o n d s ,
Check for a Temporary DTC with the scan tool.
ls Temporary DTC P1410 indicated?
YES Replace the air pump.l
NO Intermittent failure, system is OK at this time.
Check for poor connections or loose terminals at
t h e a i r p u m p a n d t h e a i r p u m p r e l a y . I
4 .
1 1 - 1 5 5